Custom Membrane Keypad
Customized Auto instrument display table Overlay with Backlit Diffusion film
Home /Products /

Membrane Switches

/

Backlit/LED Membrane Switches

/

Customized Auto instrument display table Overlay with Backlit Diffusion film

Customized Auto instrument display table Overlay with Backlit Diffusion film

Materials can be customized: acrylic, glass, PC, or PMMA composite board.

Panel effects can be customized: glossy, sandy, anti-fog, anti-glare (AG), etc.

The product can be customized with an integrated black scheme, and different symbol areas can be designed with different colors of light transmission.

Colors and patterns can be customized.

The surface of the product can resist outdoor UV for 500 hours and is antibacterial, corrosion-resistant, and scratch-resistant.

Surface Layer

Materials can be customized: 

acrylic, glass, PC, or PMMA composite board.

Panel effects can be customized: 

glossy, sandy, anti-fog, anti-glare (AG), etc.

The product can be customized with an integrated black scheme, and different symbol areas can be designed with different colors of light transmission.

Colors and patterns can be customized.

The surface of the product can resist outdoor UV for 500 hours and is antibacterial, corrosion-resistant, and scratch-resistant.

Adhesive layer

The material model can be customized:

3M, gelatin sponge and other adhesives 

The materials can be customized according to different use environments, 

For example:  dustproof , waterproof and high-low temperature...... 

The materials can be customized according to different thickness requirements; The adhesive layer can be customized according to the materials pasted on the product;

Diffusion Film

Material can be customized: PC, PET...

The diffusion effects of materials can be customized according to the different diffusion requirements, and the point light source can be changed into a surface light source.

Materials can be customized with different diffusion colors...

Materials can be customized according to different requirements of thickness.

Environmental suitability.

Operating temperature: -25°C~+75°C 

Storage temperature: -40°C~+85°C 

Relative humidity: 45%~75% (customizable)

 

 

 

Main Technical Parameters 
(1) Electrical Properties 
1.Operating voltage:  ≤ 50VDC 
2.Working current:  ≤ 100mA 
3.Contact resistance:  0.5 ~ 5Ω 
4.Insulation resistance:  ≥ 100MΩ (100VDC) 
5.Substrate voltage:  2kDVC 
6.Spring time:  ≤ 6ms 
7.Loop resistance:  30Ω
8.Insulation ink voltage:  100VDC 
   
(2) Mechanical Properties 
1. reliability, service life: > 1 million times 
2. closed displacement: 

0.1 ~ 0.4mm (no touch-type) 

0.4 ~ 1.0mm 

3. health standard for power:  280g Power 
4. silver migration: 

In 55 ℃, humidity 90%, 56 

hours later, the second-line between the 10MΩ/50VDC

5. silver online no oxidation, no impurities   
6.silver width

 ≥ 0.3mm, the smallest interval of 

0.3mm, line edges <1 / 3, the 

line gap of <1 / 4 width 

7.pin spacing standard  2.54mm
8.lead anti-curvature, with d 

10mm steel rod line pressure roller

80 constantly. 

   
(3) environmental performance 
1. operating temperature:  -40 ℃ ~ +80 ℃
2. storage temperature:  -40 ℃ ~ +85 ℃ temperature of 95% ± 5% 
3. atmospheric pressure:  86 ~ 106kDa 
   
(4) print index 
1. print size deviation

± 0.15mm, clear code looks 

bad ≤ 0.1mm edges 

2. chromatic deviation

± 0.11mm/100mm, insulated cover all

 the Silver Line Ink 

3. no ink dispersion, writing non-defective
4. chromatic aberration is not more than two
5. may have creases, paint stripping 

6. transparent windows transparent clean, uniform color, not a scratch, and impurity

Overlay Material
PET, PC, Silicone,Metal
Artwork Format
CorelDraw, Adobe Illustrator AI, AutoCAD, CDR
Color
Pantone and RALcolor matching system
Button
Embossed/Flat/Metal/Silicone/Rubber
Keys Options
Tactile: metal domes or poly domes
Non-tactile: flat button, printed silver spot on the circuit
Connector Tail
Zero insertion force(ZIF) with 0.5MM ,1.0MM,1.25MM pitch
Female connector with 2.54MM pitch
Circuitry option
Silver printed conductive inks, FPC, PCB
Printing
Screen printing, Semi-Auto matic printing, Automatic Printing
Window
Clear or transparent, translucent, red/black/white/green etc transparent window
Surface
Glossy surface or matte surface
Rear Adhesive
3M467,3M468, 3M9080, 3M9495, 3M7959,3M9471, 3M300VHB, etc...
Certificate
ISO9001、RoHS、CE、SGS、ISO1348、TS16949

 

Test Instrument

 

 

GET FREE INQUIRY NOW
We will contact you as soon as possible!

New Products

Latest News

  • CNC Machining
    CNC Machining
    September 18, 2020
    CNC machining is that it is a subtractive manufacturing process that typically employs computerized controls and machine tools to remove layers of material from a stock piece&mdash;known as the blank or workpiece&mdash;and produces a custom-designed part. This process is suitable for a wide range of materials, including metals, plastics, wood, glass, foam, and composites, and finds application in a variety of industries, such as large CNC machining, machining of parts and prototypes for telecommunications, and CNC machining aerospace parts, which require tighter tolerances than other industries. The automated nature of CNC machining enables the production of high precision and high accuracy, simple parts and cost-effectiveness when fulfilling one-off and medium-volume production runs. However, while CNC machining demonstrates certain advantages over other manufacturing processes, the degree of complexity and intricacy attainable for part design and the cost-effectiveness of producing complex parts is limited. Material Aluminum/Copper/Brass/Stainless Steel/Steel/Iron/Alloy/Zinc/Titanium/ABS/PP/PET/PC/PS/Nylon/POM/PVC/PMMA/PEEK Tolerance Standard CNC machining on metal parts and plastic parts. We can make parts according to your tolerance requirements, if you do not have special requirements on the tolerance,our tolerance is according to the standard of SJ/T10628-1995 standards, class 2. INO Technology can make repeated positioning accuracy within tolerance 0.005mm, providing strong guarantee for precision parts. Surface Treatment With CNC machining, we can make different surface treatment, such as Anodizing, Brushing, Galvanized, Sandblasting, Polishing, Powder Coating, Plating, Printing and Laser Engraving etc. From below picture, you can find the effect of different surface treatment. Quality Control INO&rsquo;s quality is 100% according to ISO9001 Standard. We seriously take care of the quality control from IQC to OQC, throughout each step of the production.INO dedicated to strict quality control and thoughtful customer service. We strive to exceed our customers' expectation in all aspects of product manufacturing process, and recognize our great responsibilities to our customers.All our materials are purchased from certified suppliers. All materials will be subject to warehousing quality inspection upon arrival. After the pre-production sample is confirmed, the sample will be sealed immediately. prenatal sampling inspection, intrapartum sampling inspection, and postpartum sampling inspection, and the inspection results will be recorded in time. All files are traceable.Below are some inspection equipment for reference:
  • 3D Printing
    February 08, 2023
    3D printing is also called additive manufacturing, which is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety of processes in which material is deposited, joined or solidified under computer control, with material being added together (such as plastics, liquids or powder grains being fused), typically layer by layer. Here are many various options available for 3D printing: Fused Deposition Modeling(FDM). This helps product prototypes by layering from the bottom up with heat and thermoplastic filaments. These machines use a variety of materials, both expensive and affordable. Stereolithography(SLA) is another method of 3D printing, which relies on a UV laser that cures layers in a photo-reactive epoxy resin. It&rsquo;s more accurate than FDM and is an excellent choice for engineers who need small features or other detailed work. In Selective Laser Sintering(SLS) 3D printing, a high-power laser fuses tiny polymer powder particles. Though we will not be discussing this 3d printing method, it&rsquo;s important to emphasize that various materials exist for all types of additive manufacturing. Fused Filament Fabrication (FFF) is an extrusion process where the object is built by depositing melted material layer-by-layer. The plastics used correspond to the same thermoplastics that can be found in conventional manufacturing processes, like ABS and Nylon. Vacuum casting is a quick and cost-effective alternative to 3D printing. The master model is made from a silicon rubber filled with a polyurethane resin that is then placed in a vacuum. This process causes the resin to harden by removing all of the air bubbles from the material and what you&rsquo;re left with is a perfect representation of the master model. CNC is a subtractive manufacturing process. It starts by fixturing a block of metal or plastic material inside the CNC mill. Using G-code, the CNC machine is programmed to rapidly mill out parts from the block of raw material. ,it is designed for both rapid prototyping and low-volume production of end-use components. Material Acrylonitrile Butadiene Styrene or ABS: Makers lean towards ABS because it offers strength through filaments shaped like pasta. It&rsquo;s sometimes referred to as Lego plastic, comes in an array of colors, and is ideal for at-home 3D printing. Polyamide is a widespread choice for 3D printing, both at home and industrially, because it is so varied. It&rsquo;s cheap, includes interlinking and interlocking parts, and can be painted and dyed. Polylactic Acid, or PLA: Biodegradable PLA, produced from corn starch and sugar cane, is a favored 3D printing material because it&rsquo;s more sustainable than most other materials. It also leads to more robust products overall. PLA is the cheapest material for 3D printing and is used both at home&ensp;and on larger industrial projects. Other material can be use for 3D printing: ASA/PET/PC/PC-ABS/PETG/TPU/PEEK/PP/Aluminum/Copper/Brass/Stainless Steel/Steel/Iron/Alloy/Zinc/Titanium Material Performance Parameters Material Performance of PA nylon Material Performance of PET PEEK Material Performance of PC PP Material Performance of Resin Material Performance Of Metals Material Performance for SLS Surface Treatment Common polish/ machining/painting Quality Control INO&lsquo;s quality is 100% according to ISO9001 Standard. We seriously take care of the quality control from IQC to OQC, throughout each step of the production. INO dedicated to strict quality control and thoughtful customer service. We strive to exceed our customers' expectation in all aspects of product manufacturing process, and recognize our great responsibilities to our customers. All our materials are purchased from certified suppliers. All materials will be subject to warehousing quality inspection upon arrival. After the pre-production sample is confirmed, the sample will be sealed immediately. prenatal sampling inspection, intrapartum sampling inspection, and postpartum sampling inspection, and the inspection results will be recorded in time. All files are traceable. Below are some inspection equipment for reference:
  • Die Cutting
    February 22, 2017
    Die cutting is an essential manufacturing process for a wide range of product applications. It offers precision, process flexibility, low cost set up, and is ideally suited for both low and high volume production. As experts in the manufacturing of parts composed of rubber compounds. Die cut gaskets can be supplied plain or pre-laminated with pressure sensitive adhesives; we have an extensive range of adhesives to suit numerous applications, our sales team are on hand to help you with your requirements. The die-cutting mould cost is cheap, but the material is purchased from rubber sheet, this kind of material perfermance (such as temperature resistant, resists deformation, compression set, tensile strength etc.. ) is not as good as compression parts. Material Silicone/NR/NBR/EPDM/foam NBR/Foam EVA/foam silicone/foam EPDM/foam CR...All materials can be with adhesive backing. Tolerance Standard We can make parts according to your tolerance requirements, if you do not have special requirements on the tolerance,our tolerance is according to the standard of ISO3302:2014 CLASS 2 Surface Treatment Matt, smooth, texture Process Flow Diagram Once the order is confirmed, our engineer will start to design the mould drawing and mould making in advance. Once the mould making is finished, we&rsquo;ll make several pieces of pre-production samples for test, if the dimensions are correct, then we will send the samples to customers for final confirmation. If the test failed, we will modify the mould or adjust the molding parameter to make new samples, and test it again. Once the samples are approval by customers, we will purchase the raw material and making quality inspection. Then mixing material, molding and trimming, we will make many times of inspection during the production. Finally we will arrange the assembly and packing. After whole order is ready, we will send the packing list to customer to arrange the shipment. Quality Control INO&rsquo;s quality is 100% according to ISO9001 Standard. We seriously take care of the quality control from IQC to OQC, throughout each step of the production. Let us show you our quality control: &diams;For raw materials We&rsquo;ll do the IQC in time. All materials are procured only from the verified suppliers, who have implemented and maintain certified quality management systems in their plants. With full certificates, such as RoHs, Reach, MSDS, FDA, LFGB, UL, EN549, BPA free, EN71, and so on; &diams;For pre-production samples we'll provide several pieces to our clients for assembly and function testing. We will seal the samples in time once they're approval. &diams;For Bulk Production We'll do the IPQCS & PQC (Multiple Sampling Inspection) during production and we'll do the FQC (Sampling Inspection) after deburr or breaking sharp edges. In order to timely find problems, solve problems, reduce defective products, reduce manufacturing costs. After packing and assembling, we'll do the OQC (Sampling Inspection) to make sure the final goods are qualified. INO Technology insist the principle "QUALITY FIRST". Below you find find our inspection equipment for your reference.
Related Products
Push Button Membrane Switch Keyboard For Industry Controller

1.Waterproof IP 65-IP68 2.Tactile & Non-Tactile 3. Silver Flex Circuit 4. Embedded LED’s, Resistors & sensors 5. UV protection design 6. Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light. 7. ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film antia-static

Learn More
Illuminated Membrane Switch For GPS

1. Colorful Modules 2. Silver Flex Circuit 3. Embedded LED’s, Resistors & sensors 4. Able to make to customer’s waterproof requirement & UV protection design 5. Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light. 6. ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film anti-static

Learn More
Automatic Printing Tactile Waterproof Graphic Overlay Clear Window Membrane Switch

1.Digital Printing,Screen Printing, Embossing 2.Flexible Printed Circuit, Tactile or Non Tactile 3. Embedded LED’s, Resistors & sensors 4. Able to make to customer’s waterproof requirement & UV protection design 5. ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film anti-static 6.Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light.    

Learn More
Tactile Illuminated FPC Membrane Switch Keypad

1.   Custom Panel 2.   Colorful Modules 3.   Flexible Reaction 4.   Custom Touch Feel 5.   Life Time >1 million Times: Key Responsive, durable stickness, high temperature resistant 6.   IP 65-68 Waterproof design is used for charging pile, weeding machine and other outdoor equipments 7.   Clear Printing: Ricb color, not easy to decolorize, not easy to wear 8.   Certificate:ISO9001 ISO13485 IATF16949

Learn More
LED Backlit Tactile Feel FPC Membrane Switch Keyboard

1. UV protection design 2. Tactile & Non-Tactile 3. Flexible Printed Circuit 4. Embedded LED’s, Resistors & sensors 5. Able to make to customer’s waterproof requirement  5. Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light. 6. ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film anti-static

Learn More
Custom Automatic Printing Flexible Circuit Membrane Switch Panel

1.Custom Flexible Printed Circuit 2.Tactile & Non-Tactile ,Embedded LED’s, Resistors & sensors 3.Able to make to customer’s waterproof requirement & UV protection design 4.ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film anti-static 5.Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light.

Learn More
Transparent Window FPC Membrane Switch Multi Color

1.Tactile & Non-Tactile 2. Flexible Printed Circuit 3. Embedded LED’s, Resistors & sensors 4. Able to make to customer’s waterproof requirement & UV protection design 5. Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light. 6. ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film anti-static

Learn More
3M Adheisve Armarium FPC Membrane Switch Keypad

1. Armarium Membrane Switch 2. Embedded LED’s, Resistors & sensors 3. Able to make to customer’s waterproof requirement & UV protection design 4. Fiber Optic & Electroluminescent Backlighting,EL  back light,  LED back light effect,  Light Guild Film (LGF or LGP)  back light, Fiber Optic Back light. 5. ESD Anti-Static Design: using Aluminum Foil, Printing AG or C plasma , ITO Film anti-static

Learn More
Top

leave a message

GET FREE INQUIRY NOW
We will contact you as soon as possible!
Submit

Home

Products

skype

whatsApp